2020 Swaploader SL-145 Base

Information

2020 Swaploader SL-145

Features may include:

  • 4 year warranty
  • Sliding jib
  • Slide through body locks
  • Large beveled rear rollers
  • Dual pivot rear section
  • Rugged main frame
  • Dual lift cylinders
  • Nylatron slide pads
  • Low pressure hydraulics
  • Rigorous 4 year test cycle
  • Integral dual counter balance valves
  • Designed and built in the USA

Photos

Highlights

  • Rice, Minnesota
  • 2020
  • Swaploader
  • SL-145 Base
  • Available
  • Body Longsill: 41.63 / 40.50"
  • Hook (Dim. B) Fixed: 35.63" | Hoist (Dim. C): 6.5" | Frame: up to 40"

Specifications

  • 2020
  • Swaploader
  • SL-145
  • Base
  • Vocational Chassis
  • Dump Angle: 56° | Hook To Rear Roller (Dim. A): 138.38" | Hoist GG (Dim. G): 68.7" | Cab Axle Dim. (Single Axle): 102" - 120" | Clear Frame Rail: 152"
  • Optimum Body (Dim. E): 12' - 14' | Potential Body (Dim. E): 12' - 15'
  • Body Longsill: 41.63 / 40.50"
  • Hook (Dim. B) Fixed: 35.63" | Hoist (Dim. C): 6.5" | Frame: up to 40"
  • Hoist Fixed: 2,250 lb
  • 18,000 lb - 26,000 lb
  • Dump Capacity (Including Container): 14,000 lb | Lift (Including Container): 14,000 lb
  • Reservoir: 15 gal
  • Relief PRessure: 3,250 PSI | Jib Cylinder Type: Models Incorporate A Single, Double Acting Cylinder With A Single Built-In Counterbalance Valve. | Jib Cylinder Quantity: 1 | Jib Cylinder Bore: Ø 3" | Jib Cylinder Stroke: 32" | PTO Pump Mount: Direct Mount SAE B, 4 Bolt | PTO Torque Required: 125 ft-lb
  • Hydraulic (CID): Gear (2.96) | Flow @ Pump: 11.4 GPM @ 1,000 RPM
  • Type: All Models Incorporate Double Acting Cylinders With Dual Built-In Counterbalance Valve. | Quantity: 2 | Bore: Ø 5" | Stroke: 40"