2020 Swaploader SL-220 Base
- Year 2020
- Make Swaploader
- Model SL-220
2020 Swaploader SL-220 Base
2020 Swaploader SL-220
Features may include:
- 4 year warranty
- Sliding jib
- Slide through body locks
- Large beveled rear rollers
- Dual pivot rear section
- Dual lift cylinders
- Nylatron slide pads
- Low pressure hydraulics
- Integral dual counter balance valves
- Designed and built in the USA
Dimensions
Length
Optimum Body (Dim. E): 18' - 20' | Body (Dim. E): 18' - 22'
Width
Body Longsill: 41.63 / 40.50"
Height
Hook (Dim. B) Fixed: 53.88" | Hook (Dim. B): 53.88" / 61.75" | Hoist (Dim. C): 9" | Frame: up to 43"
Dimensions
Dump Angle: 53° | Hook To Rear Roller (Dim. A): 193.81" | Hoist GG (Dim. G): 97.8" | Cab Axle Dim. (Single Axle): 156" - 174" | Cab-Trunnion Dim. (Tandem Axle): 150"-162" | Clear Frame Rail: 216"
Weights
Weight
Hoist Fixed: 4,100 lb | Hoist Adj.: 4,330 lb
GVWR
25,000 lb - 35,000 lb
Capacities
Cargo Capacity
Dump Capacity (Including Container): 22,000 lb | Lift (Including Container): 22,000 lb
Hydraulic Capacity
Reservoir: 25 gal
Features
Pump Type
Hydraulic (CID): Gear (4.46) | Flow @ Pump: 17.4 GPM @ 1,000 RPM
Lift Cylinders
Type: All Models Incorporate Twin, Double Acting Cylinder With A Dual Built-In Counterbalance Valves. | Quantity: 2 | Bore: Ø 6" | Stroke: 54"
Features
Relief PRessure: 2,800 PSI | Jib Cylinder Type: All Models Incorporate A Single, Double Acting Cylinder With A Single Built-In Counterbalance Valves. | Jib Cylinder Quantity: 1 | Jib Cylinder Bore: Ø 3.5" | Jib Cylinder Stroke: 48" | PTO Pump Mount: Direct Mount SAE B, 4 Bolt | PTO Torque Required: 200 ft-lb