2020 Swaploader SL-240 Base

Information

2020 Swaploader SL-240

  • 4 year warranty
  • Sliding jib
  • Slide through body locks
  • Large beveled rear rollers
  • Dual pivot rear section
  • Dual lift cylinders
  • Nylatron slide pads
  • Low pressure hydraulics
  • Integral dual counter balance valves
  • Designed and built in the USA

Photos

Highlights

  • Rice, Minnesota
  • 2020
  • Swaploader
  • SL-240 Base
  • Available
  • Body Longsill: 41.63 / 40.50"
  • Hook (Dim. B) Fixed: 53.88" | Hook (Dim. B): 53.88" / 61.75" | Hoist (Dim. C): 9" | Frame: up to 43"

Specifications

  • 2020
  • Swaploader
  • SL-240
  • Base
  • Vocational Chassis
  • Dump Angle: 53° | Hook To Rear Roller (Dim. A): 159.81" | Hoist GG (Dim. G): 88.0" | Cab Axle Dim. (Single Axle): 130" - 144" | Cab-Trunion Dim. (Tandem Axle): 120"-132" | Clear Frame Rail: 184"
  • Optimum Body (Dim. E): 14' - 16' | Body (Dim. E): 14' - 18'
  • Body Longsill: 41.63 / 40.50"
  • Hook (Dim. B) Fixed: 53.88" | Hook (Dim. B): 53.88" / 61.75" | Hoist (Dim. C): 9" | Frame: up to 43"
  • Hoist Fixed: 3,900 lb | Hoist Adj.: 4,200 lb
  • 25,000 lb - 35,000 lb
  • Dump Capacity (Including Container): 24,000 lb | Lift (Including Container): 24,000 lb
  • Reservoir: 25 gal
  • Relief PRessure: 2,800 PSI | Jib Cylinder Type: All Models Incorporate A Single, Double Acting Cylinder With A Single Built-In Counterbalance Valves. | Jib Cylinder Quantity: 1 | Jib Cylinder Bore: Ø 3.5" | Jib Cylinder Stroke: 30" | PTO Pump Mount: Direct Mount SAE B, 4 Bolt | PTO Torque Required: 200 ft-lb
  • Hydraulic (CID): Gear (4.46) | Flow @ Pump: 17.4 GPM @ 1,000 RPM
  • Type: All Models Incorporate Twin, Double Acting Cylinder With A Dual Built-In Counterbalance Valves. | Quantity: 2 | Bore: Ø 6" | Stroke: 54"